产品分类

AutoChem II 2920

292-00000-00
AutoChem 2920
数量:
292-00002-00
AutoChem 2920 with Vapor Generator
数量:
292-00000-CR
Corrosion resistant version of the AutoChem 2920. This unit uses Hastelloy tubing and fittings. All loops are replaced with Hastelloy. All solenoids, O-rings on MFC, rotary valves and transducers are replaced with Kalrez versions.

All heated parts of the system which use stainless steel manifolds are replaced with corrosion resistant manifolds, made by vapor deposited fused silica coating. The accessory kit is changed to include stainless steel gas lines instead of copper, Hastelloy loops, etc.

The unit is typically used to test sulfurized and clorinated catalyst with H2S, HCL, and SO2.


数量:
292-00002-CR
Corrosion resistant AutoChem 2920 with Vapor Generator.
数量:

Cirrus 2 Mass Spectrometer

292-33015-01
Stand alone unit
数量:
292-33015-00
For ASAP 2920
数量:
292-46101-00
Training - U.S.A. / Canada
数量:
292-46101-00
Training - European Union
数量:
292-46103-00
Training - China / Asia / All other countries
数量:

Liquid Nitrogen Transfer System

021-00000-00
Model 021
数量:

Vapor Generator

291-33003-00
For mixing an inert carrier gas with vapor from a precisely heated liquid such as pyridine.
数量:

Reference Material

004-16836-00
Silver Oxide
数量:

Flowmeter

290-29800-00
10-cm3 Bubble Burette
数量:

Gas Regulator

004-62230-32
CGA 320 fitting, 30 psig (CO2)
数量:
004-62230-35
CGA 350 fitting, 30 psig (CO, H2)
数量:
004-62230-54
CGA 540 fitting, 30 psig (O2)
数量:
004-62200-58
CGA 580 fitting, 100 psig (N2, He, Ar, Kr)
数量:
004-62230-59
CGA 590 fitting, 30 psig (ultrapure air)
数量:
004-62230-58
CGA 580 fitting, 30 psig (N2,He, Ar, Kr)
数量:
004-33601-00
Expansion kit adds an additional outlet to regulators
数量:
004-62230-326

Gas pressure regulator, CGA 326 fitting (N2O), 30 psig


数量:
004-62230-705

Gas pressure regulator, CGA 705 fitting (NH3), 30 psig


数量:

Gas Inlet Line Assembly

290-25846-00
Copper
数量:
201-25818-00
Stainless Steel, 6 ft.
数量:
201-25818-01
Gas Inlet Line, Stainless Steel, 5m (16 ft.)
数量:
290-25846-01
Gas Inlet line, Copper, 5m (16 ft.)
数量:

Sample Tube

291-61702-00
Quartz; for TPD, TPR, and BET analyses
数量:

Cap / Stopper

004-32604-08
Plastic cap, for sample tube exhaust
数量:
004-32004-00
Rubber stopper, for sample tube inlet
数量:

Brush

930-54603-00
Narrow bristled
数量:
004-54609-00
Wide bristled
数量:

Funnel

240-25853-00
For filling sample tubes
数量:

Weighing Support

230-32803-00
Foam, for supporting sample tubes while weighing
数量:

Thermocouple

291-53904-00
Shaped to enter sample tubes
数量:
291-61703-00
Sheath, ceramic, for sample thermocouple
数量:

Dewar

004-61064-00
600 mL
数量:

Dewar Cover

230-31801-00

数量:

Extraction Tool

004-54805-00
For extracting quartz wool from sample tubes
数量:

Calibration Syringe

004-61602-00
1-mL
数量:
004-61604-00
10 mL
数量:
004-61604-01
Replacement injection needle for 10-mL syringe, 3
数量:
004-61602-01
Replacement Injection Needle for 0.1 and 1 mL syringes, 3
数量:

Septum

004-32602-00
For injection port
数量:

Quartz Wool

004-32164-01
4 in. x 6 in. Bag
数量:

Reducer

004-25549-00
1/8-in. (0.32-cm) compression fitting to 1/4-in (0.64-cm) stem
数量:

Port Frit

004-27052-00
10 micron, stainless steel, 1/4 in. diameter x 1/16 in. thick
数量:

Ferrule

004-25913-00
PEEK, 1/8-in. (0.32 cm³), front and rear set
数量:
004-25912-00
PEEK, 1/16 in. (0.16 cm³), front and rear set
数量:

Fluid

004-16247-00
For gas flowmeter and leak checking
数量:

Tools

004-54113-00
Allen wrench, 7/65 in., for frit filter
数量:
004-54610-00
Nut driver, 5/32 in., for gas flowmeter
数量:
004-54001-00
Wrench, open end, 1/2 in. (1.27 cm³) x 9/16 in. 1.43 cm³)
数量:
004-54006-00
Wrench, open end, 5/16 in. (0.79 cm³) x 1/4 in. 0.64 cm³)
数量:
004-54010-00
Wrench, open end, 3/8 in. (0.95 cm³) x 7/16 in. (1.11 cm³)
数量:

Thermal Conductivity Block

291-29711-00
Nickel-iron, gold-plated filaments
数量:
291-29712-00
Tungsten, gold-plated filaments
数量:

Delay Line Assembly

290-25845-00

数量:

Gas Sampling Assembly

290-25842-00
External
数量:

Heating Mantle

003-26018-00
For vapor generator
数量:

Furnace Assembly

291-53801-00

数量:

Manual / Software

292-42803-00
Operator's manual, AutoChem 2920
数量:
292-33001-00
Operating software and operator's manual, AutoChem 2920
数量:
292-42801-00
Operator's manual, AutoChem 2910
数量:

Kit

291-33600-00
Extended Opeartion Supplies, includes reference material, O-rings, ferrules, dust mask, gloves, Dewar flask, thermocouple, sample tubes, frits, septum, and cold trap cover.
数量:

Injection Loops

290-62600-00
Injection loop, 0.5 cm³ nominal
数量:
290-62601-00
Injection loop, 1.0 cm³ nominal
数量:
290-62602-00
Injection loop, 5.0 cm³ nominal
数量:

Analytical Methods in Fine Particle Technology

008-42001-00
Analytical Methods in Fine Particle Technology
by:  Paul A. Webb and Dr. Clyde Orr
数量:

Flask

291-61704-00
50 mL, for vapor generator
数量:
004-25129-00
O-ring, Kalrez, for flask
数量:

Gloves

004-32187-00
Cotton flannel, for handling hot components
数量:

Cryocooler

029-00000-00

数量:

Kwik Cool

291-34005-00
KwikCool; provides rapid cooling of the furnace, decreasing analysis time and increasing throughput
数量:

AutoChem II 2920

292-00000-00
AutoChem 2920
数量:
292-00002-00
AutoChem 2920 with Vapor Generator
数量:
292-00000-CR
Corrosion resistant version of the AutoChem 2920. This unit uses Hastelloy tubing and fittings. All loops are replaced with Hastelloy. All solenoids, O-rings on MFC, rotary valves and transducers are replaced with Kalrez versions.

All heated parts of the system which use stainless steel manifolds are replaced with corrosion resistant manifolds, made by vapor deposited fused silica coating. The accessory kit is changed to include stainless steel gas lines instead of copper, Hastelloy loops, etc.

The unit is typically used to test sulfurized and clorinated catalyst with H2S, HCL, and SO2.


数量:
292-00002-CR
Corrosion resistant AutoChem 2920 with Vapor Generator.
数量:

Quartz Filter Disk

248-32702-00

数量:

Liquid Nitrogen Transfer System

021-00000-00
Model 021
数量:

Vapor Generator

291-33003-00
For mixing an inert carrier gas with vapor from a precisely heated liquid such as pyridine.
数量:

Cap / Stopper

004-32604-08
Plastic cap, for sample tube exhaust
数量:
004-32004-00
Rubber stopper, for sample tube inlet
数量:

Funnel

240-25853-00
For filling sample tubes
数量:

Port Frit

004-27052-00
10 micron, stainless steel, 1/4 in. diameter x 1/16 in. thick
数量:

Copyright 2011-2019 麦克默瑞提克(上海)仪器有限公司 联系方式:400-630-2202

 

网站地图